News The Importance of Fiber Laser Cutting System Inspections
These systems offer a fast, precise, efficient alternative to traditional laser cutters, with higher-quality cuts. For metal, these systems have a greatly reduced beam wavelength compared to C02 lasers, which ensures a higher absorption to get the most from fiber laser cutting systems, it is always important to conduct inspections to be sure that systems are working at their best. o metals.
In this guide, we share some tips on how to do an inspection of your fiber laser cutting systems to ensure that you get the best results.
Fiber Laser Cutting System Inspections
Some of the biggest factors that will affect laser cutting quality, in general, include the cutting height, nozzle, focus position, power, frequency, duty cycle, speed, and auxiliary air pressure. Inspections are focused on these factors, ensuring that fiber laser cutting systems are working as they should.
Things to note during inspections include the following:
Cutting nozzle type and size should be used correctly, with no damage to the nozzle.
Cutting tips should have a recommended diameter of 1.0 for ideal optical centre detection.
Optical centre detection focus should ideally be between -1 and 1 as the light spot is small and easier to see.
Protective lenses should be clean, with no water, oil or residue or any fog caused by climate factors.
The focus should be set correctly
Choosing high-quality systems is also essential. At Bystronic, we off a selection of systems made to meet your needs. Our models include ByStar Fiber, BySprint Fiber and BySmart Fiber. Contact us to learn more about our fiber laser cutting systems.